- Product Details
- Make an Inquiry
NB-450 Nonwoven Tissue & Airlaid Paper Napkin Folding Machine
Characteristics:
- Adopt consistent folding, cutting, automatic counting.
- Use band saw blade to cut and fold products so they are cut neatly at the same length. Imported cutting tool is used so it is durable and not easy to heat equipped with automatic knife sharpener. finished products are sent in 2 lines.
- Use pneumatic counting device and arbitrarily set the number of each line for each bundle package. One piece of Each bundle is higher than others so it is convenient to pack.
- mechanical low or high speed can be stepless speed with high stability.
- folding method of paper is of folding board and knife shape origami device. After it is adjusted,folding way is convertible. Folding way is Z, 1/4, 1 / 8,1 / 16 etc.
6. Iron plates for bearing the weight of table is thickened. Saw pulley is made by pig iron and its wheel surface is treated. Special cloth is packed on outer circle to reduce noise, and prevent from an being dirty. Cutting is stable, not the cutter does not run randomly.
7.Tailstock loading paper is equipped with wide belt Synchronizing transmission device and controlling tension with 30 * 30 angle iron welded and all 304 # stainless steel of seal plate.The universal bearing is used to position on the gantry.
8. Production speed: for 450 mm product, about 400-500 pieces/ min (according to the paper material adjustment). According to different tension of different paper, paper tension can be adjusted at 2 places in order to ensure the dimensional accuracy of the finished products.
9.folding roller needs heightening. It is made by domestic high-quality 45 # steel and its quenched hardness reaches HB220-280 degrees with hard chrome plated. jammed mouth is processed by line cutting, jam knife and insert paper knife are made by 4.0 thickness of high-quality stainless steel # 304.Caught must be closely smooth seamless. Jam knife and chuck are tightly matched. exquisite and not loose. in the middle of disk,screw rod is used to adjust paper deviation, and multiple folding method can be transformed. At the rear loading paper is with thick double supports so paper feeding is stable and bias is small.New disassembly is used to be convenient and easy to disassemble.
10. Bearing material is domestic high-quality 45 # steel, and high-quality Haerbin bearing is used.. Footstock configuration synchronizes wide conveying belt. Automatic sharpening device and automatic counting device are equipped . (Note: 1. Low counting sound. 2.Slider radian under folding roller is increased and sound is reduced. 3. conveyor sticks in folding stick are changed double-conveying with the gear position above, which improves the folding stability. 4.Discharge chute is drawing-type device, easy to change knife.5.Stainless steel Control panel is beautiful than the previous one. electrical cabling position is reasonable. 6.imported cutting knife)
11. Machine table, gutter and appearance are made of 304 # stainless steel plate, knife blade to the end of the chute length is 0.8 m, folded by board folding machine, evenly and smoothly, and with size standards. Bearing material is domestic high-quality 45 # steel, bright chrome-plated.
12. Total 4.4kw frequency control motor is made by Taiwan-funded factory and its electrical wire positioning is reasonable, beautiful and easy to operate.
13. Machine frame is made by international formed steel, and its surface is processed for anti rust. machine platens must make all anti-rust spray treatment. Frame welding is precise, and brackets are reinforced adequately. Pulleys, bevel gears and all transmission parts are with accurate centrality. Main gear is processed by fragmentation, easy to adjust the gap, and ensure the smooth operation of the machine.
14.Standard parts, screws are all made of domestic quality 45 # steel and SHCS. Parts which are easy to affect the finished products are are all made of stainless steel. All machine plating is the second plating, good finish, ensuring all parts of the machine anti-corrosion and rust. The machine will not be rust for 2 years.
15. Long term technical guidance is available.
Even folding
Uneven folding
Parameter:
Model |
NB-450 |
Output |
400 meters/minute(depend on various paper characteristics) |
Folded size of finished product |
long:225mm;wide:50-200mm |
Expanded size of finished product |
long:450mm;wide:200-800mm |
Folding way |
V、N、W、1/4、1/8、1/16、 |
Voltage |
380V,50Hz, 3 phases |
Total power |
4.4kw |
sizd |
L 4600mm×W 1500mm×H1800mm |
weight |
1600kg |
Parts:
Open spanner |
2 sets |
Screwdriver |
1 piece |
Allen wrench |
1 set |
Button switch |
1 set |
Spring |
2 pieces |
Screw and nut |
10 pieces |
Sharpening device |
2 pieces |
Special tool box |
1 piece |
Main configuration:
item |
specific |
quantity |
function |
brand |
Machine frame |
10#+80# channel
|
|
Support 2 tons |
International standard |
Discharging device |
Synchronization wide belt |
1 set |
With stepless variable speed of discharging material |
International standard |
Aluminum guide roller |
Aluminum roller |
5 pieces |
φ:30mm; |
Guta, Shanghai, China |
Folding tray |
Folding frame (hand wheel) |
1 set |
size:400mmx1set tooth:30mmx8 sets |
304# stainless steel |
Cutting knife |
blade saw knife |
1 set |
Cut paper |
Imported material |
Discharge chute |
Discharge material |
1 set |
|
304# stainless steel |
Bearing |
|
Many sets |
Transmission |
China Harbin, special NSK |
Counter |
counter |
1 set |
count |
Shiwei (Hong Kong) |
The electromagnetic valve
|
1 set |
Pneumatic count (brisk agility)
|
Suonuo |
|
Optical Probes
|
1 set |
Infrared |
Omron |
|
Inverter |
|
1 set |
2.2KW |
Idea Brand(Taiwan(Taiwan funded factory) |
motor |
|
2 sets |
2.2KW;2.2KW |
Shanghai or Hangzhou, China |
Potentiometer |
|
1 set |
|
Zhengtai(China famous brand) |
Button Switch |
|
5 sets |
|
Zhengtai(China famous brand) |
Air switch |
|
2 sets |
|
Zhengtai(China famous brand) |
Relay |
|
2 sets |
|
Zhengtai(China famous brand) |
Contactor |
|
2 sest |
|
Zhengtai(China famous brand) |
Platen |
Working platen |
|
|
304 stainless steel |
Electrical box |
|
1 sets |
1.5mm |
304 stainless steel |
Seal plate |
|
|
1.5mm thick |
304 stainless steel |
Dubai customer bought 1 even and 2 uneven folding machines at 1 time.
- Telephone Number:+86-135 9027 4204
- E_mail:
Browse Other Products
-
NC-1600 Automatic 2 Side Feeding Protective Gown & Apron Cutting Machine&n...
-
NB-Z200 Automatic Non-woven Handkerchief & Tissue Folding& C...